| Spud-Seal: A coarse lost circulation material and hole cleaning product, specially blended for use in drilling unconsolidated formations typically found in upper hole formations. |
| Spud-Seal: Selected sized cellulose fibers blended with non-damaging water soluble polymer. |
- Used to cure severe lost circulation.
- Excellent for hole cleaning.
- Can be used as a viscosifier in spud mud.
- Excellent for sealing off massive sand formations in surface hole.
- Biodegradable, non-damaging to productive formations.
- Can be mixed in fresh, brackish, or sea-water.
|
Color: Brown to beige mixture
Form: Mixed cellulose fibers and polymer blend
Bulk Density (lbs./cu.ft.)
Compacted: 22-25
pH in Water (10 ppb): 7.5-8.5
Packaging: 25lb multi-ply bag with poly-inner liner, 60 sacks per pallet.
|
- For regaining loss of returns: add 15 ppb. of Spud-Seal to water and spot near theft zone.
- Use as a hole cleaner: add 8-10 ppb. Spud-Seal to 40 bbls. of mud and pump sweeps as needed.
- Viscosifier: add 2-3 ppb. of Spud-Seal to mud to aid in maintaining viscosity in spud muds.
|
- Used to cure lost circulation in most vugular or fractured formations.
- Used to plug unconsolidated formations such as coarse sand or gravel on surface hole.
- Used as hold cleaner in sweeps.
- Excellent for use as a viscosifier in spud muds.
- Used as a sweep prior to cementing, to seal off any potential theft zones that may prevent a good cement job.
|
|
|
|
