MSDS

MSDS Petroblen C

Petroblen C is used to prevent or cure lost circulation in porous and fractured formations. This product can be used in water-based, oil-based and synthetic drilling fluids. 

MSDS Glassbeads

Mechanical lubricant for prevention/reduction of torque and drag. Coarse Super-Slide beads are used to assist slide drilling in horizontal drilling. Not recommended for prevention of differential sticking.

MSDS Blen Fyber

Blen-Fyber is used as a treatment for seepage losses in all mud systems. It may be used in pretreating the entire circulating system by adding 4-10 lbs/bbl. Blen-Fyber can also be used through periodic sweeps, pills or slugs.

MSDS Blen Fyber Fine

BLEN FYBER FINE is used as a treatment for seepage losses in all mud systems.  It may be used in pre-treating the entire circulating system by adding 4-10 lbs./bbl.  

MSDS Blen Plug

Blen-Plug can be used most effectively as a slug or pill treatment. For severe losses, typical concentrations of 20 to 40 ppb (or more) may be used directly in base mud.

MSDS Frac-Pak

Frac-Pak is a unique new product used to cure severe and total loss of circulation in synthetic, diesel and water muds.

MSDS Spud Seal

Spud Seal is a coarse lost circulation material and hole cleaning product, specially blended for use in drilling unconsolidated formations typically found in upper hole formations.